EDIFIER e20 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara EDIFIER e20. EDIFIER e20 12 halaman. Multimedia speaker

Input sensitivity:
1200mV ± 150 mV
NOTE:
For the need of technical improvement and system upgrade, information contained herein may be subject
to change from time to time without prior notice.

Specification

English
English

Troubleshooting

Speakers not functioning
One speaker does not function when playing CD from computer
This kind of phenomena is prone to happen with new computer system where one speaker does not function when playing
System dose not work at all
1. Please check if the power is connected, and if the wall outlet is switched on.
2. Please make sure the right input mode is selected.
3. Please check if there is a signal from audio source.
Noise coming from speakers
players or that RF noise transmitted from sound cards is high. Keep the system in active mode and remove the audio
source. If no sound can be heard at 1 meter away from the system, then there is no problem with this product.
Magnetic interference
This system is magnetically shielded, and can be placed near TV or monitor although we recommend to keep a 1 meter
distance between the audio system and the monitor or TV set.
Failure in using the slide-to-go-previous/next function
5. Please make sure your finger slides across all three touch sensible keys to complete the operation.
If you have any further questions or concerns regarding Edifier Products:
Please contact us by phone, refer to the attached warranty card.