dji M100-ZENMUSE X5 Series Panduan Instalasi - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Drone dji M100-ZENMUSE X5 Series. dji M100-ZENMUSE X5 Series 15 halaman. Gimbal installation kit
Halaman Cetak
3. Mount the Gimbal Mounting Plate
Connect the other ends of the 10-pin and 8-pin gimbal cables to their corresponding ports on
1
the Gimbal Lock.
Mount the Gimbal Mounting Plate and dampers to the Gimbal Mounting Brackets.
2
8-pin Port
10-pin Port
The dampers may deteriorate over time. Ensure that all dampers are in good condition
before each flight, and NEVER use worn or broken dampers.
4. Mount the Gimbal
Make sure the aircraft is powered off when mounting the gimbal.
Zenmuse X5
Rotate the Gimbal Lock to the unlocked position.
1
Align the key on the damping plate with the slot on the gimbal's pan motor.
2
While aligning the white lines on the Gimbal Connector and Gimbal Lock, insert the Gimbal
3
Connector.
Rotate the Gimbal Lock to the locked position.
4
1
DJI M100-ZENMUSE X5 Series Gimbal Installation Kit
2
3
©
2016 DJI. All Rights Reserved.
4
13