ARTHUR HOLM AH1 Series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor ARTHUR HOLM AH1 Series. ARTHUR HOLM AH1 Series 20 halaman. Manually foldable professional monitors
Juga untuk ARTHUR HOLM AH1 Series: Panduan Pengguna (20 halaman)

Halaman Cetak

Connections

POWER CONNECTION

1. Plug the power cable from the power supply into an AC socket of

100-240 Vac, 50-60Hz.

2. Plug the 12Vdc cable into the socket on the unit

SIGNAL CONNECTION

1. Use the DVI-I input to connect a DVI-D signal or an analog RGB signal

(VGA).

2. Plug the DVI-D connector to a DVI-D signal.

Use high quality DVI cables with 2m maximum length

Trouble Shooting

The monitor doesn't turn on:

Check the power connections at the AC plug to the DC plug on the unit

No input signal:

Check the input signal cables

No image is displayed:

Check the status of the brightness, contrast and colour controls

Bad quality image:

Check the input signal cable

Try to auto adjust the image or reset the controller