ARTHUR HOLM AH15D1HGA Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor ARTHUR HOLM AH15D1HGA. ARTHUR HOLM AH15D1HGA 14 halaman. Hdcp compliant motorised monitors for furniture integration

INPUT CONNECTORS

DVI 1/ DVI A:
DVI-I input signal. Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to
connect an ARGB (analogue) input signal and select DVI A on the OSD
monitor menu.
DVI 2:
DVI-D input signal. Connect a DVI (digital) input signal and select
DVI 2 on the OSD monitor menu.
- Use high quality DVI cables with 2 m maximum length.
12V D.C.:
Power supply input connector. XLR-4 connector.
- 1,2: Ground
- 3,4: 12Vdc
GPI:
Monitor external contact close control. SubD9 female.
1 . GPI1 +
2. GPI1 –
3. GPI2 +
4. GPI2 –
5. GPI3 –
6. GPI3 +
7. N.C.
8. +12Vdc (600mA max.)
9. Ground:
- Use GPI1 (1:12Vdc, 2: Ground) to open the monitor
- Use GPI2 (3:12Vdc, 4: Ground) to move the monitor to the memorised
position
- Use GPI3 (6:12Vdc, 5: Ground) to close the monitor
12
INPUT CONNECTORS
Termination:
Activate (ON) the termination ONLY, on the last unit of the
RS422 bus.
AHnet:
RJ45 CAT5 connector for addressable RS422 control. There is a loop
through connector to use as signal RS422 output. Up to 30 monitors can be
connected on the same RS422 bus.
USB:
USB connectors for mouse, keyboard, touch screen and webcam.
These connectors are active depending of the monitor model.
On the RS422 connectors, connect RS422 signals only. Be careful
not to connect Network cables or PoE signals, it will severely
damage the monitor.
13