dji S800 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Drone dji S800. dji S800 16 halaman. Retractable landing gearfor spreading wings
Juga untuk dji S800: Manual (3 halaman)

Halaman Cetak
dji S800 Panduan Pengguna

Center Frame Wiring

The top board is power distribution board, and the bottom board is for loading autopilot
system components.
Top Board
ESC signal outlet
To main controller
IMU mount position
Notices:
 For IMU position, make sure the arrow direction marking is pointing to the aircraft nose.
 Connect the motor 3-pin connector (M1~M6) from WKM M.C. to ESC signal socket (M1~M6) on
center frame markings accordingly.
(WKM M.C. M1
Tips:
 Main battery power leads, gimbal and PMU leads are on the bottom surface of the top board.
 Markings
and
counter clock-wise.
 If you need other lead connector, please cut the original connector and solder on the new connector.
(But not Recommend)
ESC signal socket M1, ...... , WKM M.C. M6
stand for the propeller rotation direction.
Aircraft Nose
IMU Front
ESC signal socket M6)
means clock-wise, and
Buckle
Top Board
Bottom Board
Slot
Mark
Motor clock-wise
Mark
Motor number
XT60 Female
To Gimbal
Circuit line
Parallel
Mark
Motor count clock-wise
XT60 Male
To Battery
XT60 Female
To PMU
means
6