ARTHUR HOLM Dynamic DB2 Manual Pemasangan - Halaman 9

Jelajahi secara online atau unduh pdf Manual Pemasangan untuk Monitor ARTHUR HOLM Dynamic DB2. ARTHUR HOLM Dynamic DB2 13 halaman.

INTRODUCTION

The DB2 device is available in a special version that is prepared to be

mounted from below the table with a Veneer finishing on the top of the

monitor to match the table. The Veneer is not supplied

VENEER

The Veneer can be placed in three ways (Dimensions are specified in the corresponding "Pattern Hole" document):

Option1:

Veneer: In order to adjust the plastic

touch button height, Venneer +

Glue/tape thickness must be previously

communicated.

Veneer Guide (Optional)

Option2:

Veneer + Distance Plate: For Veneers

Thickness of 1mm [0,04] or less. It will be

necessary a Distance Plate to hide the

touch button copper cylinder.

Veneer

Option3:

Veneer: The veneer thickness must be

5mm [0,16 – 0,19]. A mechanized

blind hole will be necessary to hide

the touch button copper cylinder.

Veneer

Distance Plate