dji PHANTOM 4 M-SPECTRAL Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Quadcopters dji PHANTOM 4 M-SPECTRAL. dji PHANTOM 4 M-SPECTRAL 12 halaman.

Remove the gimbal clamp

from the camera.

6. Flight

For a safe take-off, make sure that the Aircraft Status Indicators blink green slowly (using RTK* or GNSS for positioning).

Takeoff

Combination Stick Command to

start/stop the motors

Landing

Left stick down slowly until you touch the ground

Hold for three seconds to stop the motors

Spinning propellers can be dangerous. Stay away from spinning propellers and motors. DO NOT start the

motors in confined spaces or when there are people nearby.

Always keep your hands on the remote controller when the motors are spinning.

Stopping motors mid-flight: Perform the CSC to stop the motors. This feature can be enabled in DJI GS Pro.

Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury.

* RTK positioning is recommended. If using the DJI Pilot app, go to Camera View >

select a method for receiving RTK signals. If using the Mobile SDK, refer to SDK documents on RTK configuration.

7. Start Operations

Create a 3D Map mission

Specifications

● Aircraft

Max Service Ceiling Above Sea Level

Max Ascent Speed

Max Descent Speed

Max Speed

Power on the remote

controller and the aircraft.

Left stick (in Mode 2)

up slowly to take off

Perform the mission

19685 ft (6000 m)

6 m/s (automatic flight); 5 m/s (manual control)

3 m/s

31 mph (50 kph) (P-mode); 36 mph (58 kph) (A-mode)

Import photos

Launch the app.

> RTK to enable Aircraft RTK and

Composite a map