dji PHANTOM 4 PRO Panduan Memulai Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Quadcopters dji PHANTOM 4 PRO. dji PHANTOM 4 PRO 16 halaman.
Juga untuk dji PHANTOM 4 PRO: Panduan Memulai Cepat (8 halaman), Panduan Pengguna (20 halaman)
Halaman Cetak
Onsite Pre-Flight Checklist
When you arrive at the site, follow
these steps:
•
Visually inspect the area for any
power lines, trees or other obstacles
that may interfere with your flight.
Verify the location of the sun and try
to keep it at your back (you won't be
able to see the drone if you're staring
into the sun). Also try and keep the
wind to your back - if the drone drifts
on takeoff, it will drift with the wind.
For best results, fly between 10 am -
3 pm, and avoid spotty cloud cover.
•
Review your planned take-off
and landing location. Ideally, this
location should be flat, open and
large enough to not require a highly
precise landing.
•
Review power supply on your mobile
device.
•
Plug your mobile device into the
remote control using the appropriate
USB cable.
•
Turn on the remote control by
pressing the button once until the
power lights light up, then pressing
the power button a second time and
holding it down until all the power
lights are lit.
•
Open the "DJI Go 4" application on
your mobile device and make sure
the drone is not in "Beginner Mode".
•
Attach the propellers to the drone
by matching the black strip with the
motors with the three black dots
on top, and the propellers with the
silver strips to the motors with no
black dots on top. Follow the arrows
embossed on the propellers and turn
them towards the direction of the
arrow with the lock on top.
•
Make sure the SD card is inserted
into the drone.
•
Insert the battery into the drone (it
only fits one direction) and power it
on the same way as you would power
on the remote control.
•
Make sure that the flight mode
toggle is in the "P" position to
indicate automatic flight.
•
Turn on the drone. The "DJI Go 4"
app should recognize that the drone
is connected. Make sure there are
not any warnings showing on the
"DJI Go 4" app, then close the "DJI
Go 4" app.
•
Open the DroneDeploy app.
•
Check for the drone's status in the
bottom left of the screen. You should
see a green light with the status:
"Drone Connected".
•
Open your flight plan from the
Dashboard.
•
Click the airplane icon to initiate pre-
flight checks.
•
Click the checkmark icon to begin
flight. The drone will take off when
you tap on the checkmark icon.
9