FITNESS AUDIO SM-716 Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem mikrofon FITNESS AUDIO SM-716. FITNESS AUDIO SM-716 8 halaman. U series; v series
Juga untuk FITNESS AUDIO SM-716: Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (6 halaman), Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (8 halaman)

3. RECEIVER INSTALLATION

Audio output connection

There are two audio outputs on the back of the U-Series SDR5716 Receiver, a Mic-level

balanced XLR-M and Line-level unbalanced 6.35mm jack. We have supplied you with a

balanced cable that goes from the XLR output into a TRS 6.35mm jack plug as used on

the Fitness Audio Aeromix 2+2 and HRX-32 Mixers.

This cable is a perfect match for an Aeromic/Cyclemic or E•Mic/V•Mic, the balanced

cable connection will deliver the highest sound quality possible from any microphone,

with more "body" in the voice being the main audible difference. This audio connection

is shown below.

ANTENNA-B

BALANCED

However, if your mixer has an XLR input socket, then it's best to purchase a balanced

XLR-F to XLR-M cable to connect the receiver to the Mic Input. Some mixers will also ac-

cept an unbalanced jack to jack lead mic connection with the receiver's output volume

control adjusted down to suit as an alternative connection, but a balanced cable con-

nection is the better one to use.

Rack Mounting the Receiver

The Fitness Audio SDR5716 Receiver is a 19" half-rack mount design and is supplied

with a specially designed 19" rack mount adapter so can be bolted into equipment

cabinets. Assemble as shown in Fig 3. We have also supplied you with a pair of antenna

extension cables so that the two antennas can be mounted into the holes on the rack

ears out front in the air and not trapped inside a steel box.

1. GND

1 2

2. +

DC-IN

3. -

10V-15V

AF OUT

Wireless Microphone System Operating Manual

ANTENNA-A