Artic AR-SC7P-48F-M Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Artic AR-SC7P-48F-M. Artic AR-SC7P-48F-M 16 halaman. Horizontal fiber optic splice closure

Halaman Cetak

on the cable, let the cable 5mm above the hose clamp, tighten the nut in order to ﬁx the

cable. After that, release the reinforced core device, through the core and screws. Finally put

the small sealing gasket, gasket ring, nut through the tube, tighten the nut in order to seal

properly.

5.6.2 Install the mini cable in the small port: First according to the mini cable way and put it

into the sealing ring, ﬁxed the mini cable reinforced core, and then together through cable

access port, ﬁxed mini cable components, then tighten the nut in order to seal properly.

5.6.3 The big port for straight splice and part branch: should be based on the actual

installation of the cable diameter, use the appropriate double-hole sealing. Unscrew the two

fastening screws, platen, double hole ring and washer, and then put the tube into the ports,

At last put the gasket, double hole ring, and the plastic platen, and ﬁnally tighten two

fastening screws to ensure sealing.

5.6.4 Uncutting cable and the ﬁx the reinforced core: according to the diameter of the cable,

choose the right hose clamp, jammed in the slot of reinforced core base. Then put the hose

clamp on the cable, let the cable 5mm above the hose clamp, tighten the nut in order to ﬁx

the cable. After that, release the reinforced core plate, through the core and screws; ﬁx the

direct through cable in the storage tray.

5.6.5. Demount the nut of ﬁxing device of reinforced core with special wrench (plastic one),

set the reinforced core into ﬁxing slot, tighten the nut, and retighten it with metal wrench

(metal wrench to be provided by operator). See drawing 6.

Important issues: tighten the reinforce core ﬁxing screws.

Reinforced core plate

INSTALLATION MANUAL HORIZONTAL FIBER OPTIC SPLICE CLOSURE AR-SC7P-XXXF-M