dji Ronin-S Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Kamera dji Ronin-S. dji Ronin-S 17 halaman. Tethered control handle
Juga untuk dji Ronin-S: Panduan Memulai Cepat (13 halaman), Manual Penafian dan Keselamatan (10 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (7 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (10 halaman)
Halaman Cetak
3. Attach the camera dovetail plate and lens support*.
4. Slide the camera onto the camera mounting base. When a rough back and forth balance is
reached, toggle the lever to the locked position after the safety lock is engaged.
2
3
5. Attach the optional hot shoe module to the top of the camera.
1
Balancing
1. Balancing the Vertical Tilt
a. Rotate the tilt axis so that the camera lens is pointing up. Hold the tilt axis motor to ensure the
roll axis remains horizontal and check if the camera is top or bottom heavy.
b. Loosen the knob
still without tilting it up or down.
c. Tighten the knob.
* For the best results during setup, use the lens support whenever possible.
1
2
on the tilt motor and adjust the camera balance
1
1
2
©
2018 DJI OSMO All Rights Reserved.
RONIN-S Quick Start Guide
5
4
until the camera stays
2
5