dji Aeroscope AS-F1800 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Drone & Quadcopter dji Aeroscope AS-F1800. dji Aeroscope AS-F1800 19 halaman.
Juga untuk dji Aeroscope AS-F1800: Panduan Pengguna (16 halaman)

Halaman Cetak

In the Box

Aeroscope Processor ×1

Dongle

×1

[2]

Power Cable ×1

Processor Mounting Bracket A ×2

Processor Mounting Bracket B ×2

Processor GND Cable ×1

Pin ×5

[2]

Only the waterproof dongle case is included in the North American version. The actual dongle must be

purchased separately.

Overview

ANT2

ANT3

ANT0

ANT1

The antenna ports (ANT0, ANT1, ANT2, ANT3) may be used during spectrum analysis. Make sure to

[3]

select the right one.

Female Power Connector ×1

RJ45 Connector ×1

RJ45 Waterproof Case ×1

Screw Set ×1

Screw M80 ×100 (4 pcs)

Screw Nut M80 (4 pcs)

Washer M80 (4 pcs)

Screw M60 ×18 (4 pcs)

[3]

1. Antenna Ports

Connected to the antennas with the

antenna cables.

2. Power Port

Connected to a 220V AC power outlet.

3. USB Port

Connected to a wireless network card or

a monitor.

4. Ethernet Port

Connected to a computer.

5. CAN Extension Port

Used for system debugging.

6. UART Extension Port

Used for system debugging.

7. Indicators

Six LEDs that indicate the status of each

module.

8. GND Connector

Connected to the metal bracket of the

mounting device.

Aeroscope AS-F1800