EdilKamin LOGO Panduan Pemasangan, Penggunaan, dan Pemeliharaan - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan, dan Pemeliharaan untuk Kompor kayu EdilKamin LOGO. EdilKamin LOGO 20 halaman.
Halaman Cetak
INSTRUCTIONS FOR USE
,n the same wa\, adMust the shutdown times. 7he program
is con rmed b\ pressing the 0E18 button when Save
OK appears on the displa\.
When con rming the Weekl\ program the da\ to which
the program is to appl\ must be selected
0on; 7ues; Wed; 7hurs; Fri; Sat; Sun
Once \ou have chosen the da\ b\ scrolling through them
with the and ke\s, con rm b\ pressing 0E18 and
proceed with the settings of the programs in the same wa\
as for the 'ail\ program , selecting whether or not to
enable a program for each da\ of the week and choosing
the number and times of interventions.
Should \ou make a mistake whilst setting the programs
\ou can e[it without saving b\ pressing the ke\ and
Saved will appear on the displa\.
1RWH RQ DPH YDULDELOLW\
7he ame ma\ var\ depending on the t\pe of pellets
used, in addition to normal variabilit\ of the solid fuel
ame and regular cleaning of the combustion chamber
carried out automaticall\ b\ the stove.
1% 7he automatic cleaning process performed b\ the
stove does not replace the need for the user to vacuum the
stove when cold, prior to ignition).
3HOOHW UHVHUYH ZDUQLQJ
Stoves are equipped with an electronic pellet detection
s\stem.
7he detection s\stem is integrated into the electronic
control board, allowing the stove to monitor how man\
kilos of pellets are left. 7his veri cation is implemented
at an\ point whilst the stove is in operation mode.
For correct s\stem operation, it is important that the
following procedure is adhered with during the rst
ignition (that must be implemented b\ the 'E$LER).
%efore starting to use the pellet detection s\stem, \ou
must load and consume a full sack of pellets. 7his
allows for a brief running-in of the loading s\stem.
+ence, load kg of pellets.
7hen press the reserve button once, thereb\ storing
the data into the memor\ that kg have been loaded.
From now on the displa\ will show the remaining pellets
as the\ decrease in kg (......).
Each time pellets are reloaded \ou must enter the quantit\.
E.g. when loading kg, simpl\ press the pellet
load button to enter this into the memor\. For other
quantities, or in the event of an error, \ou can specif\
the quantit\ using the pellet reserve menu as follows.
3ress the 0E18 button for seconds to view the SE77,1GS.
3ress or consecutivel\ to view 7. 0a[ E.
&on rm b\ pressing 0E18 and the remaining quantit\
of pellets will be displa\ed that being loaded
(default is and can be changed using the - ke\s).
Should the hopper run out of pellets, the stove will
block and StopFlame will appear (see page ).
1ote Ever\ now and again remember to reset the "pellet
reserve warning" for it to function in a more reliable
manner.
For an\ clari cation please contact the authorised
'E$LER who performed the rst st ignition.
- 30
-