dji ZENMUSE XT S Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Drone & Quadcopter dji ZENMUSE XT S. dji ZENMUSE XT S 15 halaman.

Disclaimer and Warning

Congratulations on purchasing your new DJI

your safety and your legal rights and responsibilities. Please read this entire document carefully

to ensure proper configuration before use. Failure to read and follow instructions and warnings

in this document may result in serious injury to yourself or others, or damage to your DJI product

or damage to other objects in the vicinity. This document and all other collateral documents are

subject to change at the sole discretion of SZ DJI Technology Co., Ltd. (DJI). For up to date product

information, visit http://www.dji.com and click on the product page for this product.

The ZENMUSE

XT S has been calibrated specifically for the designated camera and lens before

leaving the factory. No physical or mechanical modification or adjustment of the gimbal is required

or recommended. Do not add any other component or device (such as a filter, lens hood, etc.) to

the camera.

The Zenmuse XT S is a delicate instrument. Do not disassemble the gimbal or camera as this will

cause permanent damage.

Be sure to use a DJI approved battery, otherwise performance may be hindered and internal

malfunction or damage may occur.

The Zenmuse XT S is currently compatible with the following DJI Aircraft: MATRICE

and Matrice 200 series. It will also be compatible with other designated products in due course. To

optimize the gimbal's performance, download the latest DJI Pilot app and update the latest aircraft

firmware, otherwise the Zenmuse XT S may not function properly.

Under stable laboratory conditions, the Zenmuse XT S achieves an IP44 protection rating by

IEC60529 standards. However, this protection rating is not permanent and may reduce over time

after long-term use.

• Make sure the gimbal port and gimbal surface are free from any liquid before installation.

• Make sure the gimbal is securely installed onto the aircraft, the microSD card slot cover is clean

and firmly in place.

• Make sure the gimbal surface is dry before opening the microSD card slot cover.

Make sure to operate your aircraft in the safest manner possible. Observe the procedures contained

in the user manual and the online tutorials to mount and connect the gimbal to your aircraft. Please

respect the AMA's National Model Aircraft Safety Code.

By using this product, you hereby signify that you have read this disclaimer and warning carefully

and that you understand and agree to abide by the terms and conditions herein. You agree that you

are solely responsible for your own conduct while using this product, and for any consequences

thereof. You agree to use this product only for purposes that are proper and in accordance with all

product. The information in this document affects

200 series V2