Artico SY PA300 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara Artico SY PA300. Artico SY PA300 16 halaman.

Rotate the base cover clockwise from OPEN position to LOCK position, you will

hear a "click" sound, the

base cover is blocked. (f)

Connect the plug in the wall socket and switch

on the appliance again. (g)

Reset filters lifetime.

If after replacing the new filter, the indicator

should reset the filter life.

1). Plug in the air puriﬁer and turn it on.

2). Press and hold the

3). Release the

will turn off.

4). The reset is now complete.

Filter replacement force mode

When using the air puriﬁer in an environment of heavy pollution, the lifespan of the

air ﬁlter may signiﬁcantly reduce. You can change the ﬁlters even if

light up. Follow the steps below to perform a hard reset

1). Replace the air ﬁlters as mentioned in the Filter Replacement section (5).

2). Plug in the air puriﬁer and let it be in standby mode.

3). Press and hold the

4). Press and hold the

The reset is now complete.

(f)

button for 3 seconds. (h)

button after 3 seconds and the light

button for 3 seconds. The indicator will light up.

button for 3 seconds again and the indicator will turn off.

lights up, you

(g)

does not

(h)