dji Zenmuse X5 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital dji Zenmuse X5. dji Zenmuse X5 18 halaman. For inspire 1 pro
Juga untuk dji Zenmuse X5: Panduan Pengguna (17 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (18 halaman), Manual (11 halaman)

Halaman Cetak

INSPIRE 1 PRO User Manual

Gimbal Operation Modes

Three Gimbal operation modes are available. Switch between the different operation modes on the

Camera page of the DJI GO App. Note that your mobile device must be connected to the remote

controller for changes to take effect. Refer to the table below for details:

Pitch

Follow Mode

FPV Mode

Free Mode

Re-alignment

Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2)

Gimbal has received an excessive external force, e.g. a collision. Please take off from flat, open

ground and protect the gimbal after powering up.

Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The

gimbal will recover when it dries out.

The angle between Gimbal's orientation and aircraft's nose remains

constant at all times. One user alone can control the pitch motion of the

Gimbal, but a second user is required to control the pan motion using a

second remote controller.

The Gimbal will lock to the movements of the aircraft to provide a First-

Person-View flying experience.

The Gimbal's motion is independent of the aircraft's orientation. One user

alone can control the pitch motion of the Gimbal, but a second user is

required to control the pan motion using a second remote controller.

Tap to force the Gimbal orientation to re-align with aircraft's orientation

by panning from gimbal's current orientation. Pitch angle will remain

unchanged during the re-alignment.

Pan

Roll