Altronix TMV2 Manual Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Manual Instalasi untuk Kandang Altronix TMV2. Altronix TMV2 16 halaman. Access & power integration
Juga untuk Altronix TMV2: Manual Instalasi (16 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (20 halaman)
Halaman Cetak
Installation Instructions for Altronix Power Supplies and/or Sub-Assemblies to TM2:
1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (Fig. 3, pg. 6).
Use snap on nylon standoffs for the upper two mounting holes in the board.
Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board.
2. Affix boards to standoffs (Fig. 3a, pg. 6) by pressing down the upper mounting holes onto nylon standoffs.
Use provided mounting screws to affix the lower mounting holes. Make sure that boards are locked onto standoffs.
3. For detailed information about installing and connecting Altronix sub-assemblies refer to the individual Installation Instructions listed in the
Sub-Assembly Position Chart, pg. 5 and Trove Installation Guide, Rev. 101817.
4. Fasten backplane to Trove2 enclosure utilizing lock nuts (provided).
Fig. 3
C
B
Metal Standoff Placement
B
Metal Standoff Placement
B
B
Trove / Lenel
A
A
A
A
Fig. 3a
Pem
Snap on or
Metal
Standoff
Backplane
Sub-Assembly
- 6 -