djm direct DJMSS406 Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Melihat djm direct DJMSS406. djm direct DJMSS406 19 halaman. Scroll saw

Lighting System (For #65115B)

Press "I" to turn on the lamp.

Press "O" to turn off the lamp

This light switch can only work when the ON/

OFF switch for the product is turned on

13. Maintenance

Warning! In the interests of

operational safety, always switch off

the saw and remove the mains plug

before carrying out maintenance

work.

General

Wipe chips and dust off the machine from time to

time using a cloth.

Re-application of the wax coating on the

workbench makes feeding the workpiece to the

blade easier.

The mains cable should be replaced immediately

if pulled out, cut or damaged in any other way.

Do not lubricate the motor bearings or internal

parts!

Changing the Saw Blade with pins

Switch off the saw and remove the

mains supply plug before installing

saw blades in order to avoid injuries

caused by unintentional activation of

the saw.

1. Saw blade removal. Extract the saw-blade by

unscrewing the Clamping screw. Remove the saw-

blade from the upper and lower support by slightly

pressing the upper arm down.

2. Inserting the new saw-blade. Lead one end of the

saw-blade through the perforation in the table and

insert the saw-blade pins into the notch. Repeat this

procedure at the upper blade support. Before hooking

it in. Slightly press the upper arm down. Check the

position of the blade pins at the supports. Tighten

the blade by means of the Clamping screw. Check the

blade's tightness. Keep on rotating clockwise in order

to tighten the blade even more.