djm direct DJMBD13-40 Panduan Pengoperasian Asli - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian Asli untuk Bor djm direct DJMBD13-40. djm direct DJMBD13-40 19 halaman. Bench drill
Halaman Cetak3. Unpacking
●Open the packaging and remove the device carefully.
●Remove the packaging material as well as the
packaging and transport bracing (if available).
●Check if the delivery is complete.
●Check the device and accessory parts for transport
damage.
●If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of
swallowing and suffocation!
4. Safety
a) General Safety Rules
Understand your Machine
Read this manual and labels affixed to the machine to
understand its limitations and potential hazards.
Be thoroughly familiar with the controls and their
proper operation. Know how to stop the machine and
disengage the controls quickly.
Do not attempt to operate the machine until you fully
understand how to properly operate
the engine and how to avoid accidental injuries and/or
property damage.
If the unit is to be used by someone other than original
purchaser or loaned, rented, or sold, always provide
this manual and any needed safety training before
operation. The user can prevent and is responsible for
accidents or injuries that may occur to themselves,
other people, and property.
Do not force the machine. Use the correct machine for
your application. The correct machine will do the job
more efficiently and safer at the rate it was designed.
Personal Safety
Do not permit children to operate this machine at any
time.
Keep children, pets, and other people not using the
unit away from the work area. Be alert and shut off
unit if anyone enters work area. Keep children under
the watchful care of a responsible adult.
Do not operate the machine while under the influence
of drugs, alcohol, or any medication that could affect
your ability to use it properly.
Dress properly. Wear heavy long pants, boots, and
gloves. Do not wear loose clothing, short pants, or
jewelry of any kind. Secure long hair so it is above
shoulder level. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
safety glasses with side shields when operating.
Protect eyes, face, and head from objects that may be
thrown from the unit. Always wear safety goggles or
safety glasses with side shields when operating.
Wear appropriate hearing protection. Wear respiratory
protection to avoid the risk of inhaling harmful dust.
Always keep hands and feet away from all moving
parts during operation. Moving parts can cut or crush
body parts.
Always keep hands and feet away from all pinch
points.
Do not touch parts that might be hot from operation.
Allow parts to cool before attempting to maintain,
adjust, or service.
Stay alert, watch what you are doing, and use common
sense when operating the machine.
Do not overreach. Do not operate the machine
while barefoot or when wearing sandals or similar
lightweight footwear. Wear protective footwear that
will protect your feet and improve your footing on
slippery surfaces. Keep proper footing and balance at
all times. This enables better control of the machine in
unexpected situations.
Inspect your Machine
Check your machine before starting it. Keep guards in
place and in working order. Make sure all nuts, bolts,
etc., are securely tightened.
Never operate the machine when it is in need of
repair or is in poor mechanical condition. Replace
and maintain
damaged, missing, or failed parts before using it.
Keep the machine in safe working condition. Regularly
check to see that keys and adjusting wrenches are
removed from the machine area before starting it. A
wrench or a key that is left attached to a rotating part
of the machine may result in personal injury. Avoid
accidental starting. Be sure the motor switch is off
before transporting the machine or performing any
maintenance or service on the unit.
Transporting or performing maintenance or service on
a machine with its switch on invites accidents. If the
machine should start to vibrate abnormally, stop the
motor and check immediately for the cause. Vibration
is generally a warning sign of trouble.
Electric Safety
Protect yourself from electric shock. Do not plug or
unplug the motor while standing in or around damp
or wet ground. Do not use the unit in wet or damp
areas or expose it to rain. Prevent body contact with
grounded surfaces: pipes, radiators, ranges, and
refrigerator enclosures. Make sure your fingers do
not touch the plug's metal prongs when plugging or
unplugging the unit.
Avoid inadvertent starting. Make sure that the switch
is switched off when plugging the plug into an outlet.
Only use approved and appropriately identified
extension cables for use outdoors. Only use cable reels
in the unrolled state.
3