Cleerline SSF-TKITE-300 Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Uji Cleerline SSF-TKITE-300. Cleerline SSF-TKITE-300 17 halaman. Basic fiber test kit

Maintenance and Troubleshooting

1. Always keep the connector ports of the power meter clean.

2. Use the regulated optical connector for testing.

3. Shut off the power and cover laser with dust-proof cap after use.

4. When using AC adapter, ensure power supply is within the

required voltage range.

5. Remove the batteries when light source not in use for extended

periods of time

Troubleshooting

Issue

Faint screen display

Unit fails to turn on

Optical power is not

stable after when

light source turned

1. Ensure the connector is clean before testing.

2. Do not plug in the power supply when batteries are installed.

3. Do not look into the laser beam when unit is on.

4. Charge the batteries before use. Do not charge in unit.

5. Cover laser with dust-proof cap when not in operation.

Handheld Optical Power Meter

Possible Reason

Low battery power

or battery inserted

incorrectly

Warning

Solution

Charge or replace

the battery.

(A) Replace the

battery

(B) Re-insert the

battery

Allow a 5 minute

warm-up period