Artila Matrix-512 Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk PC Industri Artila Matrix-512. Artila Matrix-512 17 halaman. Linux arm9 industry box computer

Halaman Cetak

To write the date information to RTC.

User can also use NTP client utility on Artila FTP to adjust the RTC time.

/ntpclient [time server ip]

4.9 SSH Console

Matrix-512 support SSH. If you use Linux computer, you can use SSH command to login Matrix-512.

The configuration of SSH and key are located at /etc/config/ssh

The key generation program is available on Artila FTP: /matrix and ipac/utility/ssh_keygen

User can copy this program to Matrix-512 to generate the key.

4.10 Install GNU Toolchain

Find a PC with Linux 2.6.X Kernel installed and login as a root user then copy the

arm-linux-3.3.2.tar.gz to root directory of PC. Under root directory, type following command to install

the Matrix-512 toolchain.

#tar zxvf arm-linux-3.3.2.tar.gz

4.11 Getting Started the Hello Program

There are many example programs on Artila FTP. To compile the sample you can use the Make file to

and type:

make

To compile and link the library. Once done, use ftp command

ftp 192.168.2.127

And bin command to set transfer mode to binary

ftp>bin

To transfer the execution file to Matrix-512 user disk (/disk) and use

chmod +x file.o

To change it to execution mode and

./file.o

to run the file.

‧11‧

Matrix-512 User Guide