Artimi ADP-RDK Desain Referensi - Halaman 7

Jelajahi secara online atau unduh pdf Desain Referensi untuk Adaptor Artimi ADP-RDK. Artimi ADP-RDK 8 halaman. Wireless usb adaptor reference design sample kit.

Halaman Cetak

Step 4

In the Certified Wireless USB management application on the PC, indicate that you want to

add a new device. When prompted, ensure that the 'cable association' method of connecting

is selected.

Step 5

Any further options provided in the wireless management application can be set as you wish.

Step 6

Once association is complete (should take no more than 5-10 seconds), disconnect the USB

cable between the PC and the device side wireless adaptor.

Step 7

Reconnect the USB mass storage device to the device side wireless adaptor.

You have now added a new host association! To switch between the 'pre-associated' host side

wireless adaptor and the wireless PC just associated, press and release the button on the top

of the device side wireless adaptor. An LED on the side of the device adaptor should change

to indicate which available host is now selected for use. The status of the connection to a host

is indicated as follows:

Host selected and connected

Host select but not connected

Host not selected

The ADP-RDK can store up to three associated hosts. When a fourth one is added, the

first one associated is overwritten (the association of the two adaptors in the sample kit is

permanent and cannot be overwritten).

Quick Start Guide

• 7