Altronix HubSat42Di Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Altronix HubSat42Di. Altronix HubSat42Di 12 halaman. Passive utp transceiver hub with integral isolated camera power
Juga untuk Altronix HubSat42Di: Panduan Instalasi (8 halaman)
Halaman Cetak
Fig. 1 - HubSat4Di Circuit Board
1b
28VAC
24VAC
VIDEO1
1a
1i
PVD1
1a - BNC Connector: Video in from remote camera video out to DVR.
1b - Output PTCs: Protects each output.
1c - Power Terminals: 24VAC/28VAC power outputs.
1d - Output Voltage Switches: Selects 24VAC/28VAC/OFF for each output.
1e - LED(s) 1-4: Power output indicators.
1f - Data: RS422/RS485 input from head end equipment (DVR) for PTZ control.
1g - Channels 1-4: Single CAT-5 or higher structured cable out to HubWay, HubWayLD or HubWayLDH enables
transmission of up to four (4) video signals. Pin out configuration (Fig. 3, pg. 7).
1h - Data: CAT-5 or higher structured cable to data port on HubWay, HubWayLD or HubWayLDH or
head end equipment (DVR).
1i - Channels 1-4: CAT-5 or higher structured cable to cameras. Pin out configuration (Fig. 3, pg. 7).
- 6 -
1c
28VAC
AUX1
AUX2
24VAC
VIDEO2
PVD2
DATA 1-4
1h
1c
28VAC
AUX3
24VAC
VIDEO3
VIDEO 1-4
PVD3
1g
28VAC
AUX4
24VAC
VIDEO4
PVD4
HubSat4Di Installation Guide
1d
1e
1f