akkuteam VAS 5581 Panduan Petunjuk Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur akkuteam VAS 5581. akkuteam VAS 5581 17 halaman. Hv measurement adapter
Operating Instructions
HV Measurement Adapter VAS 5581
4.6.1 Installing the
lithium-ion battery
NOTE!
Make sure that all devices and consumers are
switched off or disconnected from the power supply before
installation.
1. Unscrew and remove the rear cover of the VAS 5581.
2. Place the lithium-ion battery in
the lower area intended for it. The
cable connection should be on
the right side. No further fixing in
place is necessary.
Before connecting the battery,
ensure that the device is discon-
nected from the power supply
and switched off.
3. Attach the plug to the circuit
board of the device so that the
white socket guide rail on the
circuit board is able to engage
the recess in the red battery plug
as intended (refer to Figure
2 + 3).
www.akkuteam.de
1
2
3
22
Attaching the plug in a manner
contrary to the instructions
specified above may cause
defects, or result in a short-circuit,
as soon as the VAS 5581 is
switched on.
4. When you are sure that you
have connected the lithium-ion
battery in accordance with the
instructions, screw the rear cover
of the VAS 5581 back on. Your
HV diagnosis box is now ready
for use.
23
V 1.0