djpower DSK-1000V Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Mesin Kabut djpower DSK-1000V. djpower DSK-1000V 12 halaman.

Halaman Cetak

4. Control

4.1. Preparation

1.
If you are sure that all the parts are there and no defects are
level surface
first.
2.
Make sure that all foam parts removed especially at the nozzle.
3.
Open the lid of the fluid tank and fill the tank with the demmanded fluid Please be sure to use
only recommended by B&K fluid. Other fluids may produce a non-desired effect or destroy the
machine. The warranty does not cover damage due to incorrect fluid!
4.
Close the lid and make sure that no fluids leaked into the device. If you are unsure, you can
take the tank out well and fill it out of the machine. Liquids in the machine can cause short
circuits and are danger to life and limb. Do not overfill the tank!

4.2. Start-up

1.
Connect a power supply corresponds to the power cable (included) to the specifications of the
machine. Be aware of a sufficient
2.
Turn on the machine with the rear power switch.
3.
The button lights red when the machine gets power.
4. The display shows HEAT.
5.
It takes about 4 minutes until the machine is heated up. If the machine is finished with the
heating, the display shows CH-1.
6.
The machine has 4 different modes for which you can make different settings.
grounding!
6 / 12
present, set the
machine on a