djpower H-6 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Kabut djpower H-6. djpower H-6 8 halaman. Pro fog machine

" MENU " : Enters/changes setting mode

" UP / TIMER " :Increase value; Timer mode

" DOWN / VOLUME " : Decrease value; haze output

" ENTER / STOP " : Enter or exit setting mode; STOP

Press ENTER button, there are ten pages in total, as following:

"READY to FOG": Machine finishes heating.

Interval Set: 1~200s

Duration Set: 1~200s

Timer out: 1%~100% haze output under TIMER mode

Volume out: 1%~100% haze output under Volume mode

DMX 512 ADD: 1~512

Wireless set: Wireless remote on/off

Fluid Sensor: No fluid protection On/Off

Language: Choose English or Chinese.

Under any setting pages, press " STOP " to exit or return to the page one.

When the unit is working, press "STOP " to stop running and return to the page

one.

After enter into different setting pages, press " UP and " DOWN " to change the

value.

When it is in the page one, press " TIMER " button to enter into timer mode.

DMX Control

When the unit is connected to DMX, LCD display will show the address value. In

such case, press UP and DOWN button to change the address.

There are two DMX channels.

Channel 1: Fan output. 0~5 OFF; 6~255 increase

Channel 2: Haze output. 0~5 OFF; 6~255 increase

Service and Maintenance

Please use DJPOWER fluid. It will prolong the lifetime of machines. To avoid

danger, it is not allowed to take machine apart by unprofessional man. Neither

to refit the machine.

Excessive dust, fluid residue and dirt will degrade performance and cause

overheating. Remove dust from air vents with air compressor, vacuum or a soft

brush. The casing could be cleaned by the damp cloth.

Before storing, run distilled water through the heating system to help avoid

blocking the electric heating element.

H-6 PRO FOG MACHINE