DJTECHTOOLS Midi Fighter 3D Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media DJTECHTOOLS Midi Fighter 3D. DJTECHTOOLS Midi Fighter 3D 19 halaman.

Firmware Update

It is important to ensure your device is loaded with the latest ﬁrmware. You can tell if you

need to update your ﬁrmware by looking at the device information section.

If the device ﬁrmware needs to be updated the "Update Firmware" button will display in

orange, and the text "new ﬁrmware available" will display in red. If the ﬁrmware is already up

to date the 'Update Firmware' button will display in grey and the text "up to date" will appear

in green.

To update the device ﬁrmware simply click the update ﬁrmware button.

Note: When updating the ﬁrmware do not connect the Midi Fighter 3D via a USB Hub, this

may lead to a bricked device.

Using the Midi Fighter Utility it is possible to restore all device settings and color information

back to the factory defaults. If you are having trouble with your Midi Fighter 3D this can be a

good place to start when diagnosing the problem.

To perform a factory reset connect your Midi Fighter 3D to the Utility and in the menu bar

click,

Tools>Midi Fighter>Factory Reset

Importing & Exporting Settings

It is possible to import and export device settings, this is useful for saving and sharing device

settings and color information used for a particular mappings.

To export your settings click File>Export Settings and enter the name you wish to save the ﬁle

under.

To import your settings click File>Import Settings and select the settings ﬁle you wish to load.

Note: Once these settings are loaded you must still press "Send to Midi Fighter" to save them

to the device.

! 1 0