3Jtech NetCAMit Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera IP 3Jtech NetCAMit. 3Jtech NetCAMit 13 halaman.

Halaman Cetak
http://www.3jtech.com.tw
http://www.pnpipcameras.com
netCAMit User's Guide

2.2 Illustration

No. in
Name on
Figures
netCAMit
RJ45 network
1
connector
RJ22 power
2
supply connector

Lens

3
4
RFIO slot
5
SW_1
SW_2
6
Camera
7
information

2.2.1 Front Panel Information

RJ45 Network Connector

netCAMit is designed for 10/100Mbps Ethernet networks. netCAMit connects to the network via
category 5 cable.

RJ22 Power Supply Connector

netCAMit adopts unique RJ22 cable for power supply. The special featured RJ22 cable includes
Input / Output (I/O) function. Simply connect the Input / Output cable to the desired device and no
hardware jumper fixing on camera is required.
Lens
netCAMit box includes a standard 60° wide angle lens fixed to the camera. Other types of lens are
also available upon request. Please note that different price may apply to different lenses.
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Description
To connect to the camera and
Ethernet port via RJ45 cable
To connect to the camera and
power adaptor via RJ22
interface
300k pixels CMOS sensor
To install the optional RFIO
device
Press SW_1 button, then
netCAMit will perform the
power reset
Press and hold SW_2 button
for 5~10 seconds to reset the
camera to its factory defaults
Serial number, camera ID and
firmware version
6
Remark
Refer to section 2.2.1 for front
panel information
Refer to section 2.2.1 for front
panel information
Refer to section 2.2.1 for front
panel information
Refer to section 2.2.1 for front
panel information
N/A
The green indicator LED of RJ45
port will light when it is finished
with the reset procedure
Refer to section 2.2.2 for real
panel information