3KO Apollo Micro-2 Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Pager 3KO Apollo Micro-2. 3KO Apollo Micro-2 4 halaman. Gsm pager/remote control
Halaman Cetakwww.3ko.hu
3: Delete all predefined SMS from SIM (utility function)
4: Retrieve signal strength and diagnostics informations (in SMS answer)
5: Relay monostable switch-ON X seconds (Defined by Relay keyword)
6: Command for SIM card remote writing, only for professional users.
- SMS max. 160 characters
- entries separated by comma
- Use comma for ending
Example SMS:
xxxx6,2Altel1:+36301234567,3Relay:4,4,5Cl:+36301234567,
Answer SMS incoming: Processed: X
Where X: the number of succesfully processed commands
Followed by automatic restart.
7: Command for SIM card remote reading
Example SMS:
xxxx7,y
where Y: SIM phonebook read starting index (1-250)
Answer SMS incoming in the above writing format, with closing letter, where letter is:
C:
reading is not completed, because 160 character answer limit exceeded
E:
reading is completed
X:
any reading error occured
Recall
(10-240 sec, if the record is missing then default is 70 sec)
The data related to this keyword is the recall delay time in seconds (the time between two consecutive recalls), the pager waiting after
an unsuccessful paging before starting a repeated call to the same target (max. 2 additional trials).
Relay
(1-250 sec, if the record is missing then default is 2 sec)
Time in seconds being the relay in active status in monostable mode.
Ringing
(10-240 sec, if the record is missing then default is 40 sec)
The data related to this keyword is the time duration in seconds permitted for ringing the target number. Passing this time the pager
will finish the ringing, by interpreting it an unsuccessful call.
Smstel1, Smstel2, Smstel3
The data related to these keywords are the phone numbers which where the predefined text SMS messages will be forwarded to, when
the negative input was triggered. The second predefined SMS will be sent.
It is not obligatory to insert these keywords, their number is optional. If no SMS message is required, do not insert any of them.
Setup with 3KO USBPRG cable:
Connect the download cable to one of USB ports on the PC. An interfacing circuit is built into the house of USB connector. This
circuit functioning like a serial port and also protects the pager and the PC from each other.
Install the driver of the cable during the first use! (From www.3ko.hu)
Using:
Start the putty.exe program with 19200 baud and the serial port COMX of cable setting.
When the module is stand by (green LED is blinking in every seconds), connect the cable to the module: the white mark directed to
the antenna.
Follow the menu on the screen!
Apollo micro-2 V6.04
Thank You!
The 3KO Team