Custom Dynamics CCM-5BT Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kontrol Jarak Jauh Custom Dynamics CCM-5BT. Custom Dynamics CCM-5BT 9 halaman. Bluetooth remote

Halaman Cetak

Control Interface Main Screen Functions

Scan: Tap the Scan button to sync the interface with the re-

ceiver via Bluetooth. Select the device in the list, tap to con-

firm. The Phone should give confirmation it is connected.

Note: If the app has trouble connecting or does not show

CCM5-BT available in the list of devices, try rebooting the

phone, then double check that Bluetooth function is enabled.

CCM: CCM stands for Custom Color-Music features. Tap the

button to show the pop-up menu at the bottom of the app

screen. (see following pages for feature explanations)

Disconnect: When this is tapped, connection between the

interface and the receiver is turned off. This should be per-

formed when the system is turned off and the application will

not be used.

On: Tap anywhere in the button area and the lighting system

comes on in the default F1 single color program. When power

is turned on, this button will be red.

Off: Tap anywhere in the button area and the lighting system

will turn off.

Red Slider: Controls the amount of power to the Red LED

profile. The scale from left to right is 0-100 %. Touch the Logo

button within the slider area to adjust the intensity of the color.

This control is useful in creating custom colors.

Green Slider: Controls the amount of power to the Green LED

profile. The scale from left to right is 0-100 %. Touch the Logo

button within the slider area to adjust the intensity of the color.

This control is useful in creating custom colors.

Blue Slider: Controls the amount of power to the Blue LED profile. The scale from left to right is 0-100 %. Touch the Logo button

within the slider area to adjust the intensity of the color. This control is useful in creating custom colors.

Dim: Controls the amount of overall intensity of the lights within all programs. The scale from left to right is 0-100 %. Touch the logo

button within the slider area to adjust the overall brightness of the lights.

10. Speed: Controls the speed of the color morphing as well as the strobe patterns. The scale from left to right is 0-100 %. Touch the

logo button within the slider area to adjust the speed of strobe or color morph.

11. F1—Function 1 Single Color Mode: This is the default program when the interface is turned on. The primary colors: Red, Green,

Blue and White are controlled with the Color Sliders:

- Red: 100% + Green: 100% + Blue: 100% = White

- Red: 100% + Green: 0% + Blue: 0% = Red

- Red: 0% + Green: 100% + Blue: 0% = Green

- Red: 0% + Green: 0% + Blue: 100% = Blue

Using the 3 main colors Red, Green and Blue in different combinations allows for an infinite possibility of custom colors, experiment

to find your favorite.

12. F2—Function 2 Strobe Mode: This mode is a combination of the previous function along with a strobe. In F2, color control is avail-

able as well as the Speed of the strobe with the Slider and the ability to control the brightness with the Dim slider.

Questions? Call us at: 1 (800) 382-1388

Instructions - Page 6

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

09-2017