Custom Dynamics ProGLOW PG-7-14-C Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Lampu depan Custom Dynamics ProGLOW PG-7-14-C. Custom Dynamics ProGLOW PG-7-14-C 2 halaman.

Halaman Cetak

Non-Fairing Installation:

Disconnect the vehicle battery negative [ - ] terminal.

Review detailed service manual for instructions on replacing factory head-

lamp.

Remove the factory headlamp trim ring and headlamp from the headlamp

bucket.

Drill a 5/8" hole in the back of the headlight bucket.

Route the ProGLOW™ wiring harness through the hole in the headlamp

bucket and install the grommet.

Connect the 7" LED headlamp to the existing factory H4 plug.

Install headlamp and trim ring on the headlamp bucket.

Connect the ProGLOW™ wiring harness to Channel 1 of the ProGLOW™

Bluetooth Controller. Note: If the Brake Signal Sync is turned on in the App,

The Channel 1 Override will need to be turned ON as shown in Photo1.

Re-connect vehicle battery negative [ - ] terminal.

10. Test high and low beam functions of headlamp.

11. If the Brake Signal Sync is turned on in the App, test the Brake Sync Chan-

nel 1 Override to ensure the Headlamp halo does not turn Red when the

Brake is applied.

12. Properly Aim the headlamp for maximum performance.

Using The CDTB-H42H9H11 (sold separately). on 2014-2021 H-D™ Road King Models

Questions? Call us at: 1 (800) 382-1388

Installation Instructions - Page 2

Using The H4-TOUR-ADAPTER on 2014-2021 H-D™ Touring Models

ProGLOW™ Wiring Harness

Grommet

Black

Blue

Red

Plugs

ProGLOW™ Wiring Harness

Grommet

Black

Blue

Red

Plugs

H4-TOUR-ADAPTER

CDTB-H42H9H11

Adapter Harness

(sold separately).

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

NOTE:

Use caution when connecting the mating

ProGLOW™ accessory connectors, confirm

the mating connector is connected correctly

or damage will occur to the lighting accesso-

ries. The locking tab should slide onto the

lock and lock into position. See Photos be-

low.

LOCKED

To Channel 1 of the ProGLOW™

Bluetooth Controller

4 Pin

Plugs

To Channel 1 of the ProGLOW™

Bluetooth Controller

Black

Blue/Yellow

Low Beam Connector

Black

Blue/White

High Beam Connector

Headlamp Harness Connectors

02/2021