Altronix NetWaySP8A Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Altronix NetWaySP8A. Altronix NetWaySP8A 4 halaman. 8/16-port media converter/repeater
Juga untuk Altronix NetWaySP8A: Panduan Instalasi (4 halaman), Panduan Instalasi (4 halaman)
Halaman Cetak
Rack Mount Installation
1. Remove and discard factory installed screws from both sides of rack chassis (Fig. 3a).
2. Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B)
(included) (Fig. 3b).
3. Place unit into desired EIA 19" rack position and secure with mounting screws (not included) (Fig. 3c).
Fig. 3
Fig. 3a
Top
Front
Left
Remove
Wall Mount Installation
1. Install mounting brackets (A) on the left and right side of rack chassis using
four (4) flat head screws (B) (included) (Fig. 4a).
2. Place unit at desired location and secure with #6 size screws or larger (not included) (Fig. 4b).
Caution: It is necessary to make sure mounting screws are securely fastened
to a beam when installing the unit vertically.
Fig. 4
Fig. 4a
B
A
Shelf Installation
1-
Position and affix rubber pads (C) (included) at each corner on the bottom of the unit (Fig. 5).
2-
Place unit in desired location.
Fig. 5
Left Side
C
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty | Made in U.S.A.
IINetWaySP8A/NetWaySP16A
- 4 -
All manuals and user guides at all-guides.com
Mounting Options:
Fig. 3b
Top
B
Fig. 4b
Rubber
Pad
H06R
Front
Left
A
Dotted lines indicate studs behind sheetrock.
Mounting Hardware (Included):
Two (2) mounting brackets
A
Six (6) flat head screws
B
for mounting brackets.
Four (4) rubber pads.
C
Fig. 3c
Top
Front Left
MEMBER
NetWaySP8A / NetWaySP16A