DK SONIC DK-1000TS Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Perhiasan Ultrasonik DK SONIC DK-1000TS. DK SONIC DK-1000TS 9 halaman.

DK SONIC DK-1000TS Panduan Pengguna
Advantage
Ultrasonic is widely used throughout industries to remove difficult contaminants from
the parts during or after manufacturing process which might require a stage of
cleaning before the next process. In general, if an item can be cleaned with liquid, it
can be cleaned much faster and more thoroughly with an ultrasonic cleaner. Compared
with traditional solvent/scrubbing, our ultrasonic cleaners:
Are more effective at removing contaminants;
Are quicker to get a good cleaning effect;
Save labor time of employees (and subsequent labor cost);
can heat the cleaning solutions to a suitable cleaning temperature so as to
enhance the cleaning efficiency;
Have a digital controller of high-precision and a long service-life;
Are of high performance;
reduce chemicals in the cleaned stuffs;
Are environment friendly because of its recyclability.
For Better cleaning effect:
Immerse the cleaned stuffs well into the water.
Add a small amount of cleaning solution is added.
Make sure that there is enough space around each stuff in the tank. The more
stuffs you place in the tank, the less efficiency you can get. It is not advised to
overlap stuffs because the ultrasonic cleaning system can not work well with
layered stuffs.
Use a basket. Do not put stuffs directly into the bottom of the tank because that
is harmful for the inner tank. So it is better to use a suitable basket. Especially a
metal basket only absorbs about 8% ultrasonic energy.
Choose a suitable temperature: Generally, the higher the temperature is, the
better cleaning effect the ultrasonic cleaner can make. However, when
temperature exceed 70℃~80℃, cleaning effect will be affected. So the best
temperature we suggest is 40℃~60℃.
8