DK-TEC HNDK Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pertanian DK-TEC HNDK. DK-TEC HNDK 15 halaman. Woodchipper for tractor

Halaman Cetak
CAUTION:
Turn the chipper knife wheel ( Disc ) by hand before connecting it to
ensure that
it
moves sig freely, all bolts are tensioned and that the blades do not hit the sides and
the knife beam.
Make sure that:
1. The PTO shaft is properly lubricated.
2. The PTO shaft is properly lubricated and that the clutch is released when the levers are
pushed against the funnel.
3.
shaft
The PTO
does
4.
the wood chip pile to see if the blades need to be let go. Longer strips of wood chips are
Check
one of the
the indications that the blades are worn.

5. Checklist

not break apart or protrude under normal lifting conditions.
02/2020
the
tractor
to
5