DK2 Power OPC566E Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Chipper / Mesin Penghancur DK2 Power OPC566E. DK2 Power OPC566E 17 halaman. Tips, tricks & frequent questions
Juga untuk DK2 Power OPC566E: Lembar Faq (13 halaman)

Halaman Cetak

PART IV: Maintaining the Wood Chipper

Regular maintenance is the way to ensure the best performance and long life of your

machine. Please refer to this manual and the engine manufacturer's user manual for

maintenance procedures.

WARNING

Before performing any maintenance procedure or inspection, stop the engine, wait five

minutes to allow all parts to cool. Disconnect the spark plug wire, keeping it away from the

spark plug. Disconnect the Battery Terminals (Electric start only).

Regular Maintenance Checklist

Procedure

Check engine oil level

Check general equipment

condition

Check wedge for sharpness

Check belts

Check tire pressure

Clean engine exterior and

cooling

Change Engine Oil

Replace air filter

Replace spark plug

Engine Service

Refer to the engine manufacturer's user manual for engine maintenance.

Part IV: Maintaining The Wood Chipper

Before Each Use Every 3

First time

5hours

Every 25

Hours

Every 100

Hours