DK2 Power OPC503 Panduan Perakitan - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Penyedot Debu DK2 Power OPC503. DK2 Power OPC503 13 halaman. Chipper shredder top loading
Juga untuk DK2 Power OPC503: Panduan Perakitan (15 halaman), Petunjuk Manual (14 halaman), Panduan Instalasi (20 halaman)

DK2 Power OPC503 Panduan Perakitan
QUICK START AND TROUBLE SHOOTING GUIDE

QUICK START SETUP

ADD 10W30 OIL TO ENGINE
ADD GAS
PIN BOTH WHEELS INTO PIVOT BRAKE HOLES.
TURN KEY ON
HALF THROTTLE (CHOKE OPTIONAL FOR COLD STARTS)
PULL START THE ENGINE
TREE CHIPPING
ENGINE ON HIGHEST SPEED
FEED SMALLER TREES INTO CHUTE AND LET GO, TREE WILL AUTO FEED.
FEED LARGER TREES SLOWLY ALLOW CUTTER WHEEL TO REGAIN RPM SPEED
BETWEEN CUTS.
FEED LEAVES, TWIGS AND UPTO 1 INCH DIA TREES INTO TOP HOPPER.
TROUBLE SHOOTING
• ENGINE WONT START
TURN KEY ON – CHECK ENGINE OIL LEVEL - CHECK GAS LEVEL
UNPLUG KEY SWITCH – IF ENGINE STARTS REPLACE THE KEY SWITCH.
FOLLOW YOUR ENGINE MANUAL FOR FURTHER TROUBLE SHOOTING.
• UNIT VIBRATES
CHECK YOUR CHIPPER FOR MISSING OR LOOSE BLADES.
CHECK YOUR CHIPPER WHEEL IS NOT OBSTRUCTED AND FREELY TURNS.