Artistic Licence netLynx quad Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Gerbang Artistic Licence netLynx quad. Artistic Licence netLynx quad 12 halaman.
Halaman Cetak
LED indication
netLynx quad features various LED indicators, which give different informational signals
depending on whether the product is booting up or in operational mode. The meanings are
explained below.
During boot-up
Power LED
y
- Slow flashing green (1Hz) = booting normally
- Slow alternating green/red (1Hz) = factory start (settings cleared)
During operation
Power LED
y
- Static green = powered, normal operation
- Fast flashing green (5Hz) =
- Occulting green = remote programming command received
- Static red = fault condition
- Fast alternating green/red (5Hz) = product is not commissioned (return for service)
Net & Link LED
y
- Yellow = network link established (but
no lighting data)
- Green = Art-Net or sACN detected
Power LED:
OFF = Not connected
Green (solid) = Good power
Green (flashing) =
Red = Fault condition
**The Power LED will flash continuously when the Identify command is sent by
DMX-Workshop. This enables netLynx quad to be easily distinguished on a network
containing multiple nodes. This LED will also blip briefly in response to any programming
command received via the network.
netLynx quad User Guide
identify**
Identify**
LEDs 1, 2, 3 & 4
y
- Green = Data activity
All indicators
y
- Off = mute command received
Net & Link LED:
OFF = Not connected
Yellow = Connected but no lighting data
Green = Art-Net / sACN on network
DMX LEDs:
OFF = No data is being
sent to this port
Green = Lighting data is
being output on this port
Page 9