Customatic SQUIRE Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perabotan Dalam Ruangan Customatic SQUIRE. Customatic SQUIRE 16 halaman. Adjustable bed frame

Halaman Cetak

Troubleshooting

In the event the adjustable bed fails to operate, investigate the symptoms and possible solutions below.
SYMPTOM
The adjustable bed frame does not
respond when the remote is used.
Remote control led illuminates and
appears to be normal.
No features or function of the
adjustable bed frame activates.
Head or foot lifts elevate bed frame but
does not return to flat position.
12
SOLUTIONS
Make sure the remote control is paired with the bed
•
frame.
Check that the power cord is plugged into a working
•
and grounded electrical outlet. Unplug the power
cord from the outlet. After 30 seconds, plug it back
in. Press any button on the remote control and hold
until light on the remote control illuminates.
Make sure the remote control is paired with the bed
•
frame.
Check that the power cord is plugged into a working
•
and grounded electrical outlet. Unplug the power
cord from the outlet. After 30 seconds, plug it back
in. Press any button on the remote control and hold
until light on the remote control illuminates.
Check that the surge protection device or electrical
•
outlet is not defective. Test the outlet by plugging in
another working appliance.
Your bed frame may be obstructed preventing
•
smooth operation. Remove obstructions from around
and under the bed.
Check that the head section is not too close to the
•
wall.
If a headboard is installed, check that it is not too
•
close to the edge of the mattress. Make sure there
is enough distance between the headboard bracket
and the mattress.