ArtiVisuals Mix-iT Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Panel Kontrol ArtiVisuals Mix-iT. ArtiVisuals Mix-iT 14 halaman.

4. LCD panel

During normal operation, LCD shows the model of the connected switcher.

When pushing rotary 1-3, menus are displayed in the LCD.

5. Rotary 1 to 3

Rotary 1 to 3 are located directly above buttons 9, 10 and 'col' on the preview

and program bus. The function of turning the knobs is set in the vMix shortcuts

menu. By pressing these knobs, you enter the menus (see menus).

6. Fader

To manually perform a transition from the source selected in the program bus to

the source in the preview bus. The transition effect is set in the vMix software.

7. Downstream key buttons

By pressing these buttons, overlays are switched on. Pushing the button once

more switches the overlay off. Which input is used as an overlay can be set with

rotary 3. The buttons can also be assigned as shortcuts.

8. Rotary 4

The function of turning and pressing this knob is set in the vMix shortcut menu.

See menus

9. Play button

The function of this button is set in the vMix shortcut menu. See menus.

10. Auto button

To run a transition automatically, the speed of the transition is set in the vMix

software.

11. Cut button

To switch instantly between preview and program bus.

User Guide Mix-iT for vMix v1.0

- 6 -