AINA PTT Voice Responder Panduan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Ponsel AINA PTT Voice Responder. AINA PTT Voice Responder 4 halaman. Connecting to zello
Juga untuk AINA PTT Voice Responder: Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (4 halaman), Panduan Cepat (2 halaman), Panduan Cepat Memasangkan Perangkat (5 halaman)

Halaman Cetak
AINA PTT Voice Responder Panduan Cepat
Pairing your PTT Voice Responder to
B
your iPhone via Bluetooth
1.
Turn on your PTT Voice Responder by holding down the Power button
more than 3 seconds. After it is on, a blinking green light will indicate that the
device is ready for pairing.
2.
Turn on your iPhone's Bluetooth by going to: Settings —> Bluetooth —> Turn
on.
3.
Pair your PTT Voice Responder to your iPhone by selecting it from the Devices
list. When the device is in Kodiak-mode, it will appear as 'Kodiak-PTT' on the
Bluetooth menu. Once it has successfully paired, a blue light will begin
blinking on your device.
4.
Once you pair your PTT Voice Responder, another Kodiak-PTT will appear on
the Bluetooth Devices list. You will have to pair to this one as well, by (4.1)
selecting it, and (4.2) accepting the Bluetooth Pairing Request.
You are ready to use your PTT Voice Responder when you see two 'Kodiak-PTT'
devices connected on the Bluetooth menu.
2.
3.
NOTE: The Voice Responder can only be paired with one
device at a time. If you want to pair it to another device
you need to perform an Unpairing/ Software reset by
pressing and holding both soft buttons and both PTT
buttons simultaneously, until the LED blinks once in
yellow.
4.1.
4.2.
for