Alula RE359 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Alula RE359. Alula RE359 4 halaman. 360 motion sensor

Halaman Cetak

Troubleshooting

Problem

Alarm is not activated

although someone is

walking in detection

area

Alarm is activated with

nobody in the area

LED does not light up

at the time of the walk

test

LED does not light up

in normal operation

Pro Tips

Save battery life by taking unit out of walk test mode after

completing walk test. There is no 2 minute delay when

in walk test mode. Leaving in walk test mode will

severely decrease battery life.

Light changes will cause the sensor to trip. Ensure that the

detector is not placed near windows.

Sudden temperature changes will cause the sensor to trip.

Ensure the motion detector is not placed near heating

and cooling vents.

High humidity environments can cause condensation of

the detection lens. Ensure the motion detector is not

installed in these kinds of environments.

Protective film should be removed from the lens after

installation.

Sensor Specifications: The table below displays the

functional frequencies of each compatible sensor.

Part Number

RE159

RE259

RE259T

RE359

Probable Cause

Detection area is improper,

battery is dead, Walk Test

switch is OFF and 2 minute

delay is active

Moving object within

detection area, temperature

of object within area is

changing rapidly

Walk test switch is OFF,

battery is dead

LED switch is OFF, battery

is dead

Frequency

Compatible

319.5 MHz

Interlogix/Qolsys

345 MHz

Honeywell

345 MHz

2GIG

433.92 MHz

DSC

Remedy

Conduct a walk test, change

the battery

Remove the object from

the detection area, remove

the heat sources from the

detection area or relocate the

detector

Turn the walk test switch ON,

change the battery

Turn LED switch ON, change

battery