Alula RE610P Manual

Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Alula RE610P. Alula RE610P 4 halaman. Indoor motion sensor - pet immune, connect+ encrypted

Halaman Cetak

The Indoor Motion Sensor

or when the external contact is opened. It is battery

powered and requires no installation tools. A Pyroflex

sensor with HighBar

leading pet immunity and catch performance.

Features

• Narrow angle detection

• Detection range adjustability

• IP 55 rated weatherproof enclosure

• 5-year warranty

Enroll

by placing the panel into wireless enrollment mode, and

then removing the cover to send an enrollment signal from

the motion sensor. Alternatively, the motion sensor can

be enrolled by scanning its bar code using the Connect+

Installer App or by entering its 8-character serial number on

the interactive service provider's web portal.

Install

using the included 3M VHB

sensor on a wall or in a corner. The tape should be applied

to the back when wall mounting or to the back bevels when

corner mounting. Alternatively, screw mounting can be

done by punching out the screw mounting holes.

Installation Tips

• Mount 7.5 to 9.5 feet from the floor for an

optimal balance between catch performance

and pet immunity.

• Remove the cover and circuit board before

trying to punch out the screw mounting holes.

• Ensure the bug foam stays intact and snug

around the IR sensing element when re-

installing the circuit board.

External Contact (not evaluated by ETL)

• Use a normally-closed contact because the

motion sensor will transmit an alarm when it

sees the external contact open.

• Do not use end-of-line resistors.

CE installations must use a cover-securing screw.

Use the panel installation guide to verify proper system setup.

RE610P Indoor Motion Sensor

- Pet Immune, Connect+

alarms when motion is sensed

signal processing allows for industry-

™

tape to adhere the motion

™

Encrypted

™

Mounting Screw Holes

Ceiling

Floor

Cover-Securing Screw Hole