Alula RE251 Hidden Panic Instal Manual

Jelajahi secara online atau unduh pdf Instal Manual untuk Sistem Keamanan Alula RE251 Hidden Panic. Alula RE251 Hidden Panic 2 halaman. Honeywell compatible

Halaman Cetak

Resolution Compatibles

The RE251 Hidden Panic

system.

Features

• Hidden mounting

• 1-button arming and disarming

• Large, easy to differentiate button

• Mounts in hidden locations via VHB™ tape or screws

• Strong, reliable RF signal

• 4-6 year battery life with Panasonic™ CR2032 battery

Enrollment

• Put the control panel in program mode

Note: refer to the Honeywell control unit installation manual

• Go to Key in Programming

• Press "Add New"

• Change the key type to "1 Button"

• Select a user in the user setting

• Press Serial Number

• Press the intended button

• Wait five seconds, press the button again

• Wait five more seconds, press the button a third time

• Verify the Button Key and Loop Number

• Correlate, refer to the diagram

Battery Replacement

• Insert screwdriver to open

• Unscrew circuit board from housing

• Remove old battery and place new CR2032 battery positive side up

Pro Tips

3M VHB Tape works well if the surface is properly prepared and firm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface temperature is above 50°F

Use the panel installation guide to verify proper system setup.

RE251 Hidden Panic

Honeywell Compatible

can arm, disarm, and generate panic signals for the security

Insert screwdriver here to open

Panic

(Loop 1)

Disarm

(Loop 2)

Arm

(Loop 3)