Alula 2GIG RE214T Manual

Jelajahi secara online atau unduh pdf Manual untuk Alarm Asap Alula 2GIG RE214T. Alula 2GIG RE214T 13 halaman.

Halaman Cetak

Resolution Compatibles

Smoke Alarm

that alarms when it detects smoke or

temperatures above 135°F (57°C).

Features

• UL217 and ULC531 listings

• Smoke and heat detection

• 5 year warranty

Quick Start Guide

1. Remove the mounting plate.

2. Pull the battery tab.

3. Restore the mounting plate and

twist it fully onto the smoke alarm.

Note: Enrollment is possible only

if the mounting plate is twisted

onto the smoke alarm.

4. Enroll the smoke alarm by placing

the panel into wireless enrollment

mode and then holding down the

smoke's test button until the smoke

alarm beeps.

Panel Questions

Sensor Type

Equipment Code

Sensor Age

Loop Number

Sensor Reports

Sensor

Supervised

5. Remove the mounting plate and

refer to Sections 2 and 6 for

positioning and installation.

6. After mounting plate is installed

restore the smoke alarm onto the

mounting plate and fully test the

smoke alarm per Section 7.

To replace the battery,

smoke alarm from its mounting plate

and replace the batteries.

This manual should be read prior to use and retained for further information.

Verify proper enrollment and operation using your security panel's installation manual.

RE214T Smoke Alarm

2GIG

is a fire-protection device

Smoke Selections

[09] 24-hour fire

[16] 24-hour fire

with verification

[0895]

SMKT2-345

[0] New

[1]

[1] Enabled

detach the

Compatible

™

12 inches

minimum

Attention

Pull Battery Tab

12 inches

minimum

Position Smoke Alarm

Test Smoke Alarm