Alunar M508 Prusa i3 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer 3D Alunar M508 Prusa i3. Alunar M508 Prusa i3 6 halaman. Diy 3d printer kit

printing test. Please insert the SD Card into the card slot on the left back of the screen and then choose the

"test-*.gcode" file and start printing with rotating the spin button. （SD-Card:\Manual&AssemblyVideo\3-Test

print\test-*.gcode）

Congratulations! You've already accomplish the whole assembly for the M508. Please feel free to

contact our customer service if you have any problem on technology or other. We will spare no effect to

settle your problems accordingly. As you complete the printing test, you would be pride of yourself by

creating the first 3D printer work. And welcome to share your amazing and successful DIY experience to

our page online ( www.alunar.net )

E. Senior Instruction

Off-line Printing: copy the "X.gcode"file to the SD card and insert the card into your printer, then start

your printing directly. And you need to change it to "X.gcode"if the file you want to print is "X.STL".

How to use slicing software: Please open the "SD-Card: \ Software\Slicing software" and click the

software"Cura 15.04" to slice the printing file as per the use manual shown on "How to use Cura".

Online Printing: Connect the printer to your computer and then you can get start printing by computer

control.

Connecting to your computer with USB cable: Please open the "SD-Card: \ Software

\RepetierHost_1_0_6" and click the software"RepetierHost_1_0_6", then you can start printing with

slicing the printing file by Repetier according to "How to use Repetier".

F. Frequently Asked Questions and Solutions

1. Please get the "Common problem" from the SD card for your reference（SD-Card:\Manual\5-Common

problem）

PS: Please visit our sites if you would like get more information on 3D printer:

http://www.alunar.net.