DKT Comega IPLoA-MESH-AG-W Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang DKT Comega IPLoA-MESH-AG-W. DKT Comega IPLoA-MESH-AG-W 14 halaman. Wifi

Trouble shooting

If you find your Wi-Fi network works abnormally.

Please do the following check.

Step 1:

Check the status of central IPLoA-MESH-AC-W

The normal LED behavior should be:

•

Power LED: Green on

•

LAN LED: Green slow blinking

(95% on/5% off)

•

Wi-Fi LED: Green on

If Power LED is off then the hardware is broken,

please use one of the other IPLoA-MESH-AC-W

as the central controller, connect it to 3rd party

gateway via Ethernet cable.

If LAN LED is not correct then please check the

3rd party gateway and the Ethernet cable.

If Wi-Fi LED is not correct then please press the

pairing button more 10s to do factory reset and

after the device boot up, re-initialize the whole

network.

Step 2:

Check the status of other IPLoA-MESH-AC-W

The normal LED behavior should be:

•

Power LED: Green on

•

LAN LED: Green on (Ethernet port connect

to some device, such as a PC), or Off (no

Ethernet link)

•

Wi-Fi LED: Green slow blinking

(95% on/5% off)

If Power LED is off then the hardware is broken.

Please replace the hardware and do pairing with

central IPLoA-MESH-AC-W again.

If Wi-Fi LED is not correct then please press the

pairing button more 1s to do pairing with central

IPLoA-MESH-AC-W again.

IPLoA-MESH-AC-W_User Guide_2017-06-12

Specifications are subject to change without notice.

DKT is not responsible for any typographical errors or wrong.

Page 14

on or off