Aluprof DC920 Manual Pemrograman - Halaman 2

Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Pemancar Aluprof DC920. Aluprof DC920 2 halaman.

Halaman Cetak

1. Selecting the operating mode

Press the „MODE" button will

switch the transmitter

to the 'MAN' mode.

2. Setting of the timer

Programming of the timer can be performed only in 'MAN' mode.

If there will be a bigger interval during the programming than 10 seconds the timer will go from the setting mode out.

Hold the MODE button will

switch the transmitter to the

'MAN' mode.

Press the „UP" or „DOWN"

button to set the minute.

3. Settings hours for automatic controls

Programming of the timer for the automatic controls can be performed only in automatic or random mode.

If there will be a bigger interval during the programming than 10 seconds the timer will go from the setting mode out.

Pressing „MODE" buton will

switch the transmitter to the

„AUTO" or „Random" mode.

Press the „MODE" buton to

switch for set up rolldown time.

Press another time the „MODE"

button will switch the transmitter

to the 'AUTO' mode.

Hold the TIME button for 5

seconds till the hour will blink

Hold „TIME" buton dor 5

seconds until LCD will stop

blinking and you will see actual

time.

Hold the „TIME" button

for 5 seconds till the rollup icon

will show up.

Press the "TIME" button

to switch between hour

and minute.

Press another time the

„MODE"button for 2 second will

switch the transmitter to the

'RANDOM'mode.

Press the „UP" or „DOWN"

button to set the hour.

Press the "TIME" button

to switch between hour

and minute.

Press the „UP" or „DOWN"

button to set the hour and the

minutes of the rolldown time.

Press the "TIME" button

to switch between hour

and minute.

Press the „UP" or „DOWN"

button to set the hour and the

minutes of the rollup time.

Hold the TIME button for 5

seconds save all settings.