Cutting Edge 100A MPPT Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Cutting Edge 100A MPPT. Cutting Edge 100A MPPT 8 halaman. Charge controller

Cutting Edge 100A MPPT Panduan Pengguna

TROUBLESHOOTING:

PROBLEM
Charge icon is not on when
it's sunny
Load icon off
Load icon flashing slowly
No display on screen
Odd characters on screen /
incorrect voltage displayed
(verified with multimeter)
Rev 20200515
"Innovative Renewable Energy Solutions"
CAUSE
Solar panel polarity (+/-) reversed
Solar panel not connected
Solar panel defective
Wire(s) cut or disconnected
Mode setting wrong
Battery low
Overload
Short circuit on load output
Battery voltage too low or battery
polarity (+/-) incorrect
Defective charge controller
SOLUTION
Use a multimeter to verify continuity and
voltage output from solar panel(s)
Refer to load settings earlier in this docu-
ment
Reduce load output or correct short circuit.
Try again after 1 minute.
Check battery and / or connection
Page 8