DLab Thermo Control HC110-Pro Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Laboratorium DLab Thermo Control HC110-Pro. DLab Thermo Control HC110-Pro 19 halaman.
Halaman Cetak
Speed, Time button respectively, the corresponding
characters will flash. Rotate the Adjustable knob to
set the parameters. If time is set to 00:00, it means
continuous working mode. After the setting
completed, push the adjustable knob to start
work.Refer to below figure.
Temp.
Speed
Timer
Prog.
Temp.
Speed
Timer
Prog.
Set
Acutal
30.5
1500
07:00
Set
Actual
30.5
30.5
1500
800
07:00
06:59
RUN
5.3.2 Multiple Step work without Saving
A．The program set in the single step is the
first step by default. Refer to below figure.
Set
30.5
Temp.
1500
Speed
07:00
Timer
1-1
Prog.
B．Push the Prog. button, start to set the second
step. The last line of in the Set column shows 1-
2 now. Refer to below figure.
Actual