Aluratek AUS0202 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Aluratek AUS0202. Aluratek AUS0202 2 halaman. 2/4-port usb 2.0 auto sharing switch
Juga untuk Aluratek AUS0202: Panduan Memulai Cepat (1 halaman), Kartu Referensi Produk (1 halaman), Panduan Memulai Cepat (1 halaman)

Halaman Cetak
Step 7 cont:
Technical Support
If you need further assistance, please contact the Aluratek support department
for troubleshooting prior to returning this device.
Web: www.aluratek.com/support
Local (Irvine, CA): 949-419-6504
Toll free: 1-866-580-1978
AOD Icon Legends
Green - the USB device is idle and is ready to be connected by any computer
Yellow - the USB device is being used by the current computer
Red - the USB device is currently being used by another computer or is disabled
AOD (Access-On-Demand) Settings:
Idle Time-out:
The Idle Time-out function allows the user to set a time in which other computers
are able to connect to the device after a specified idle time. For example, you
can set an idle period of 60 seconds in which after 60 seconds of idle time the
AOD software will update the status of the taskbar so others are allow to
connect to the USB device.
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by whatever measures may be required to correct the interference.
AOD Settings
To change the Idle Time-out value:
1. Right Click on the USB switch icon in the taskbar
2. Select "Config"
3. Input the desired Idle Time-out value
4. Click "Apply"
5. Click "OK" to exit
Warranty
Aluratek warrants this product against defect in material or workmanship for 1 Year
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker
has been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE
PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING
SOFTWARE, OR IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect
to it's products, contents or use of this documentation and all accompanying software, and
specifically disclaims it's quality, performance, merchantability, or fitness for any particular
purpose. Aluratek reserves the right to revise or update it's product, software or documentation
without obligation to notify any individual or entity.
Automatic printer sharing:
With a printer selected, you will able to print from all computers connected to the
switch without pushing any button or changing any cable.
To choose a printer:
1. Right Click on the USB switch
icon in the taskbar
2. Select "Config"
3. Select the desired available printer
4. Click "Choose"
5. Click "OK" to exit